iDatalink Remote Start for 2013-2018 RAM 2500 Tip-Start Pickup Diesel Automatic
Subcribe to back in stock notification
Free Shipping
Free standard shipping to Contiguous 48 US States
Free Returns
Learn More.
** THE VEHICLE LISTED REQUIRES KLON PROGRAMMING FOR THIS UNIT TO WORK! **
You will need the ADS-USB Cable in order to complete the KLON programming processes which can be purchased here: BUY REQUIRED ADS-USB Cable
How the KLON Process works:
1. We will pre-programmed your unit to your vehicle.
2. During the installation process (as per your installation guide) you will have to connect the unit to your PC via the ADS-USB Cable.
3. Once connected you will visit idatalink.com using the Internet Explorer browser.
4. You create a free account.
5. You will be prompted to install a small extension.
6. Once you install the extension and refresh the page, the website will detect your unit and may ask you for your vehicle information to complete the programming process and install the correct firmware on to your unit.
iDatastart CH12
Remote start T-harness for select 2011-up Chrysler, Dodge, Fiat, Jeep, and RAM vehicles
Vehicle-specific T-harness
iDatastart's ADS-THR-CH12 T-harness connects their iDatastart CMHCXA0 HC remote start module to your selected Chrysler-built vehicle. This T-harness plugs into your vehicle's electrical database system, allowing you to start and stop the engine remotely, and control some basic factory security functions as well. Some wiring may be required — one to four connections, typically. You can identify your vehicle in our fit guide to see if this harness is compatible. Warranty: limited lifetime.
What's in the box:
- 3' Main T-harness
- 59" 4-Pin Molex plug to four 2-pin Molex plugs
- 29" 6-Wire harness
- 29" 1-Wire harness
- Four 8" optional terminal wires (pinned for Molex plug)
MFR #ADS-THR-CH12
FT-DC3-LC Remote Start System
No Wiring comes with this system as you MUST must purchase either a T-Harness Solution or the low current or high current harnesses which are sold seperately
Universal remote start solution designed for high and low-current draw vehicles. Enables (3XLOCK) remote start from the factory key fob. Supports CompuStar RF kits and DroneMobile telematics for additional range. Compatible with iDataStart t-harnesses sold separately for seamless, 'plug & play' installation. NO KEY REQUIRED for immobilizer bypass on most vehicles.
We can eliminate the hassle of programming your remote start, as we provide free flashing after the purchase of each unit!
To save yourself the trouble, please contact us by sending us the following vehicle specifics to our e-mail:
Vehicle Make (ex. Ford), Year (2014), Vehicle Model (F-150)
Ignition Type (Push-to-Start or Key-Start)
Engine Type (4, 6, 8, etc. cylinder)
Key Fob (Factory or Aftermarket).
We won't be able to offer the free programming of your remote start without this information, so be sure to send it at your earliest convenience to ensure fast shipping!
RETURNS POLICY
You may return your item(s) for refund within 30 days of receipt of your shipment.
You may return your item(s) for replacement within 30 days of receipt of your shipment.
We do not ship any replacements before we receive and inspect the returned merchandise.
Please read our policy carefully as we cannot process a return in the unfortunate event that the below conditions are not met.