iDatalink HRN-HRR-FO1 + ADS-MRR2 Retain the factory steering wheel audio controls and amp with a new car stereo for select 2006-2016 Ford, Lincoln, Mercury, and Mazda vehicles
Free Shipping
Free standard shipping to Contiguous 48 US States
Free Returns
Learn More.
iDatalink HRN-HRR-FO1 + ADS-MRR2 Retain the factory steering wheel audio controls and amp with a new car stereo for select 2006-2016 Ford, Lincoln, Mercury, and Mazda vehicles
DETAILS
iDatalink Maestro HRN-HRR-FO1 Plug and Play T-Harness for select Ford Vehicles
RR and RR2 compatible radio replacement harness for select Ford, Lincoln, Mazda and Mercury vehicles 2006-2016. The radio side of the harness terminates in a universal connector that can be used in conjunction with available Maestro Head unit adapters for a plug n play solution or removed for conventional connections Please see vehicle fit guide for more information on this solution.
Features:
Allows installation of a new receiver with iDatalink port in select Chrysler-made vehicles (also requires the Maestro ADS-MRR or ADS-MRR2 module)
Retains the use of your steering wheel audio controls and factory amp
Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood, Pioneer, and Sony receivers
Vehicle Application:
Ford
Econoline/ E Series: 2008 - 2013
Edge: 2007 - 2010
Escape: 2008 - 2012
Expedition: 2007 - 2014
Explorer: 2006 - 2010
Explorer Sport Trac: 2006 - 2010
F-150 (With Factory Navigation): 2009 - 2012
F-150 (Without Factory Navigation): 2009 - 2012
F-150 (w/o"My Ford", w/o "My Ford Touch"): 2013 - 2014
F-250 (Without 8" Screen): 2013 - 2016
F-350 (Without 8" Screen): 2013 - 2016
F-450 Without 8" Screen: 2013 - 2016
F-Series Super Duty: 2008 - 2012
Flex (With Factory Navigation): 2009 - 2012
Flex (Without Factory Navigation): 2009 - 2012
Focus: 2008 - 2011
Fusion (With Factory Navigation): 2006 - 2012
Fusion (Without Factory Navigation): 2006 - 2012
Mustang: 2007 - 2009
Mustang (With Factory Navigation): 2010 - 2014
Mustang (Without Factory Navigation): 2010 - 2014
Taurus: 2008 - 2012
Taurus Limited: 2010 - 2012
Taurus X: 2008 - 2009
Lincoln
MKS: 2009 - 2012
MKT: 2010 - 2012
MKX: 2007 - 2010
MKZ: 2006 - 2009 / 2011
Mark LT (With Factory Navigation): 2010 - 2011
Navigator: 2008 - 2014
Zephyr: 2006
Mazda
Tribute: 2007 - 2011
Mercury
Mariner: 2008 - 2010
Milan: 2006 - 2011
Mountaineer: 2006 - 2010
Sable: 2008 - 2009
What's in the box:
Ford installation harness
OBDII harness (pre-connected to main harness)
Sub harness
Camera harness
2 Yellow/Black wire harnesses
iDatalink Maestro RR2 Interface Module
Connect a new stereo and retain the steering wheel audio controls and other factory features in select 2006-up vehicles
Keep your vehicle's features
iDatalink's Maestro ADS-MRR2 module, along with the correct interface harness for your vehicle, allows you to install a new car stereo in select late-model Chrysler, Fiat, Ford, General Motors, Honda/Acura, Subaru, Toyota/Scion, and Volkswagen vehicles while retaining your steering wheel audio controls and other factory conveniences you've grown accustomed to. And setup only takes a few minutes via Bluetooth from your smartphone or other device, a big improvement over previous models. You'll also need an additional Maestro vehicle-specific wiring harness that connects your new receiver to the ADS-MRR2 module and your vehicle's wiring. When you purchase a new car stereo, we will automatically offer this harness along with the ADS-MRR2 module at a discounted price on your way to the Cart.
Here's how it works
First, you connect the Maestro to your computer using the included USB cable or to your smartphone or other device via Bluetooth, visit www.idatalink.com/maestro, and follow the instructions. Once the unit has been "flashed," it's ready to go.
Retains steering wheel audio controls
The ADS-MRR2 module also allows you to use your factory steering wheel audio controls with your new receiver. Using the intuitive web programming interface, each factory button can be assigned a specific radio function. Better yet, you can also assign a secondary "press and hold" radio function to each factory button, effectively doubling what can be controlled. It's simple to update the module's firmware and software via a wireless Bluetooth connection.
Command center
The ADS-MRR2 features three programmable outputs which allow you to control relay-driven aftermarket accessories from an iDatalink Serial Port-compatible Kenwood, JVC, Alpine, Sony, or Pioneer in-dash receiver. These outputs can be individually configured to Latch, Toggle, Follow a CAN signal in the car (firmware dependent), or have a custom output configuration, as well as setting Delay On and Delay Off times for each output. You can also assign a steering wheel control button from the vehicle to control one of these outputs. The ADS-MRR2 also features a dedicated port for radar detector integration that allows you to connect to select Escort radar detectors (sold separately).
Keeping your factory features with an iDatalink-compatible car stereo
If you're buying a compatible Kenwood, JVC, Pioneer, Sony, or Alpine receiver, you'll enjoy the outstanding performance of your receiver, plus seamless touchscreen control over most of the factory features in select vehicles (see Details for specific functions and installation notes). You'll also see a list of these features on the way to the Cart with the car stereo you've selected.
With most iDatalink-compatible car stereos, you'll also be able to add additional features like performance gauges, climate controls, and parking assistance that appear on your new receiver's touchscreen.
Product highlights:
allows installation of a new car stereo in select 2006-up vehicles built by Chrysler, Fiat, Ford, GM, Honda/Acura, Subaru, Toyota/Scion, and Volkswagen
works with required vehicle-specific harness (sold separately) to retain factory steering wheel audio controls, retain the factory amp if present, and integrate all car stereo connections
retains factory convenience features (OnStar, SYNC, Uconnect, and more) with select Kenwood, Alpine, Pioneer, Sony, and JVC touchscreen receivers
displays engine performance data on touchscreen with select Kenwood, JVC, Pioneer, Sony, and Alpine multimedia receivers
setup via Bluetooth-enabled device or mini-USB-to-USB-A cable
three programmable outputs control relay-driven aftermarket accessories
dedicated port connects to select Escort radar detectors (sold separately)
dimensions: 4-3/4"W x 3/4"H x 3-1/4"D
warranty: 1 year
MFR # ADS-MRR2
What's in the box:
Radio replacement interface module
18" Interface harness (4-pin to 4-pin)
18" SWC harness (4-pin to 3.5mm/bare-wire)
22" Audio harness (3-Pin to 3.5mm)
8" Programmable output harness (6-pin to bare-wires)
8" Radar harness (6-pin to bare-wires)
7" USB-C to USB-A cable
RETURNS POLICY
You may return your item(s) for refund within 30 days of receipt of your shipment.
You may return your item(s) for replacement within 30 days of receipt of your shipment.
We do not ship any replacements before we receive and inspect the returned merchandise.
Please read our policy carefully as we cannot process a return in the unfortunate event that the below conditions are not met.