Alpine SPV-65-JLT 6-1/2" speaker soundbar system + MB Quart NA2-400.2 400W Peak

Alpine SPV-65-JLT 6-1/2" speaker system for rear soundbar of 2018-up Jeep vehicles + MB Quart NA2-400.2 400W Peak

Alpine SPV-65-JLT

6-1/2" component speaker system for rear soundbar of 2018-up Jeep vehicles

Upgrade your Jeep's soundbar

Alpine promises good times for the gang in the backseat of your 2018-up Wrangler or your 2020-up Gladiator with this awesome speaker upgrade. Alpine's SPV-65-JLT component speaker system lets you upgrade the factory 3" and 4" speakers in your rear soundbar with 6-1/2" polymer woofers and 1" tweeters. Alpine has also designed this weather-resistant system to endure the environmental harshness of life in your Jeep, even when the top is off.

Worthy sound

This 6-1/2" component system lets you use factory bolt holes and gives you two weather-resistant woofer cones and 1" Teteron dome tweeters. Alpine provides vehicle-specific connectors for easy installation, and premium grilles for a great look. Get ready for a serious sonic step-up.

Important Installation Note: You'll have to enlarge the 4" openings in your soundbar to accept the larger 6-1/2" speakers, and Alpine includes a template for cutting the plastic. If you haven't attempted a project like this before, you should consult a professional installer.

Product highlights:

compatible with select 2018-up Jeep Wrangler and 2020-up Jeep Gladiator models

package includes:

6-1/2" polymer woofers

1" Teteron dome tweeters

speaker grilles

vehicle-specific connectors

template for cutting

handles up to 90 watts RMS (225 watts peak)

uses factory bolt holes

modification required

IP55 weather-resistant rating

sensitivity: 87.8 dB

impedance: 4 ohms

What's in the box:

Alpine SPV-65-JLT owner's manual

One right speaker

One left speaker

Template

Eight M4x20mm Machine screws (5mm Allen head)

2 Pollyfill sheets (10" x 13")

Warranty information

On-line product registration information

Important Notice sheet

Installation manual

MB Quart NA2-400.2

400W Peak NA2 Series Class-D 2-Channel 2-Ohm Stable Amplifier

Product highlights

100 Watts RMS x 2 @ 4 ohms

200 Watts RMS x 2 @ 2 ohms

Total Peak Power: 400 Watts

Marine and Powersports Certified

Built-In Low-Pass and Hi-Pass Filters

Aluminum Heatsink

Dimensions: 3.7" W x 5.51" L x 1.77"

General Features:

MB Quart NA2-400.2

Class-D Full Range 2-Ohm Stable 2-Channel Amplifier

Ultra Compact design built for powersports applications

Marine and powersports certified

RMS Power Rating:

4 ohms: 100 watts x 2chan.

2 ohms: 200 watts x 2 chan.

Total power output: 400 watts

Pulse Width Modulated MOSFET power supply

Wired remote bass level control included

LED power (green) and protect (red) indicators

Soft start turn-on

Mono channel operation

Speaker-level (high-level) inputs

Preamp RCA outputs to daisy chain multiple amps

3-way protection circuitry (thermal, overload, and speaker short protection)

Dual speaker terminals simplify the hookup of multiple speakers

Heavy duty aluminum alloy heat-sink

Frequency Response: 20 - 20,000 Hz

Signal to Noise Ratio: >90dB

Variable high-pass filter: 15 - 300 Hz, 12 dB/octave

Variable low-pass filter: 50 - 300 Hz, 12 dB/octave

Fuse Rating: 30 A x 1

10 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.

Dimensions: 3.7"W x 5.51"L x 1.77"H

FEATURES

• The SPV-65X-WRA is a complete speaker system upgrade that is Alpine engineered for the 2007-2018 Jeep Wrangler JK
• 6.5-inch speakers which can be installed as a component or coaxial system, using the included adapters
• CTA-2031 Power Rating: 75W RMS, 225W Peak
• Weather resistant: IP55
• No cutting or splicing - Includes vehicle specific speaker connectors