JVC KS-DR2104DBT drvn Series Compact 4-Channel Marine Amplifier w/BT 50W x 4RMS
Free Shipping
Free standard shipping to Contiguous 48 US States
Free Returns
Learn More.
Rugged power for your music on land or sea
JVC's compact drvn Series KS-DR2104DBT amplifier will add new clarity and impact to the basic sound system in almost any kind of vehicle on land or water, and it'll fit in a lot of places where space is tight. This marine-rated 4-channel amp will power your audio system with 50 watts RMS per channel over twice the power of most factory radios or aftermarket marine receivers. The amp features a tough all-weather chassis that's certifiably waterproof, dustproof, salt-spray rustproof, and resistant to damage caused by excessive vibrations. This amp will survive almost anything, even a power washing.
Bluetooth input, streaming, and remote control
You won't need to buy and install a receiver in your boat or ATV to enjoy music on the go. The KS-DR2104DBT comes with a Bluetooth remote, so you can stream directly from your phone or tablet, as well as control the volume, EQ, and track selection.
Versatile features
You can use this amp in bridged 2-channel mode to run a pair of high-performance speakers with up to 150 watts RMS each. The KS-DR2104DBT comes with the controls you need to get music sounding right. You'll find separate low- and high-pass filters for the front and rear channels at your disposal, allowing you to tailor the amp for driving full-range, component midrange, or low-frequency speakers.
-
Product highlights:
- Compact 4-channel amplifier for marine and powersports vehicles
- 50 watts RMS x 4 at 4 ohms
- 75 watts RMS x 4 at 2 ohms
- 150 watts RMS x 2 bridged at 4 ohms
- Class D amp technology
- Bluetooth input and remote control
- streaming, volume, EQ, track selection, preamp output
- Variable high- and low-pass filters (50-200 Hz, 12 dB/octave)
- Suitable for marine and powersports applications
- IP67/IP66 certified waterproof and dustproof
- ASTM B117 certified rustproof
- 3-axis multi-frequency vibration proof
- Bluetooth input only
- Preamp outputs
- Wiring and hardware not included with amplifier
- 10-gauge power and ground leads recommended
- Fuse rating: 40A x 1
- Dimensions: 8-3/4"W x 1-15/16"H x 4-1/8"D
- JVC KS-DR2104DBT owner's manual
- 4-Channel Marine/MotorSports amplifier
- Attached 12" Power/ ground/ input-output harness w/ inline fuse holder
- 40-amp ATO fuse (installed)
- Wired remote control w/ 8' cable attached
- Flush-mount bracket for remote
- Four 5/8" screws
- One 5/16" screw
- Double-sided adhesive pad
- Instruction manual
- Warranty and product registration information
More Info:
What's in the box:
TECHNICAL SPECIFICATIONS
Marine/Powersport Amps
Manufacturer: JVC Mobile
Amplifier Type: Marine/Powersport Amplifier
Number of Channels: 4 Channel
Peak Power Output: Up to 500 Watts
Audio unit
- Max Power Output
- 600W
- Rated Power Output
- Stereo (4 ohms)
- 50W x 4 (20Hz - 200Hz, less than or equal to 1.0% THD)
- Stereo (2 ohms)
- 75W x 4 (1kHz, less than or equal to 1.0% THD)
- Bridged (4 ohms)
- 150W x 2 (1kHz, less than or equal to 1.0% THD)
- Speaker Impedance
- 4 ohms (2 ohms to 8 ohms allowable)
- Frequency Response (+0, -3dB)
- 10Hz - 35Hz
- Input Sensitivity (+0, -3dB)
- 0.2V - 5.0V
- Signal to Noise Ratio
- 89dB
- Low Pass Filter Frequency (-12dB/oct.)
- 50Hz - 200Hz (variable)
- High Pass Filter Frequency (-12dB/oct.)
- 50Hz - 200Hz (variable)
Bluetooth
- Version
- Bluetooth Ver. 5.0
- Frequency Range
- 2,402 GHz - 2,480 GHz
- RF output power (E.I.R.P.)
- +4 dbm (Max), Power Class 2
- Profile
- A2DP, AVRCP
General
- Waterproof
- Yes (IPX6, IPX7)
- Dustproof
- Yes (IP6X, IP7X)
- Rustproof
- Yes
- Vibration-proof
- Yes
- Operating Voltage
- 12V DC car battery
- Current Consumption
- 26A
- Dimensions (W x H x D)
- 7-13/16" x 1-15/16" x 4-1/8"
- Weight
- 1.6kg (3.5lbs)
RETURNS POLICY
You may return your item(s) for refund within 30 days of receipt of your shipment.
You may return your item(s) for replacement within 30 days of receipt of your shipment.
We do not ship any replacements before we receive and inspect the returned merchandise.
Please read our policy carefully as we cannot process a return in the unfortunate event that the below conditions are not met.