MB Quart MBQR-STG5-2 Stage 5 Audio System For Polaris RZR 14-Up Receiver, Four 8" Speakers, 2-Channel Amp, 10" Sub & Mono Amp
Free Shipping
Free standard shipping to Contiguous 48 US States
Free Returns
Learn More.
MB Quart MBQR-STG5-2 Stage 5 Audio System For Polaris RZR 14-Up Receiver, Four 8" Speakers, 2-Channel Amp, 10" Sub & Mono Amp
Your Polaris RZR is a high-performance side-by-side with plenty of power, and MB Quart's Stage 5 kit is the ultimate MB Quart RZR system. With a marine digital media receiver, front and rear 8" all-weather speakers, a 2-channel amp, a mono sub amp, and a 10" subwoofer, this system will add some serious thump to your off-road adventures.
MB Quart designed this package to fit right into your RZR, with no cutting and minimal hassle. It also comes with all the parts and pieces needed for a smooth, hassle-free installation. Each component is tough enough for trail duty, so you won't have to worry about your system getting swamped.
Product highlights:
- marine digital media receiver (does not play CDs)
- system also includes:
- 4 speakers, 10" subwoofer, 2-channel amp, mono amp
- dash-mount panel with USB and aux inputs
- speaker and sub enclosures, dash kit, amp brackets, installation parts and wiring
MB Quart GMR-LED marine digital media receiver (does not play CDs)
- built-in amplifier (20 watts RMS/40 peak x 4 channels)
- built-in Bluetooth connectivity
- USB port works with Apple smartphones
- global AM/FM/Weather tuner
- inputs: AUX in, USB port, video/camera input
- outputs: 6-channel preamp outs (4-volt front, rear, sub), video out
- independent subwoofer level control with selectable low pass filter
- warranty: 1 year
MB Quart 8" marine speakers (2 dash and 2 cage-mount)
- compression horn design for outstanding volume
- power handling up to 90 watts RMS (180 watts peak)
- designed to marine and off-road use
- 1" titanium compression diaphragm tweeter
- Santoprene rubber surround
- impedance: 4 ohms
- warranty: 1 year
MB Quart 10" marine subwoofer
- handles up to 400 watts peak power
- RZR-specific enclosure replaces glovebox
- dual voice coils
- IP67-rated
- warranty: 1 year
MB Quart NA2-400.2RC 2-channel amp
- Class D design
- 200 watts RMS x 2 at 2 ohms (400 watts peak)
- frequency response: 20-20,000 Hz
- low-pass crossover and bass boost
- conformal-coated circuit board — suitable for power sports and marine applications
- warranty: 1 year
MB Quart NA2-400.1 mono subwoofer amp
- Class D design
- frequency response: 10-300 Hz
- power specs: 200 watts x 1 at 4 ohms (400 watts x 1 at 2 ohms)
- electronic crossover
- warranty: 1 year
- MFR # MBQR-STG5-2
What's in the box:
- This package contains 7 individually boxed items:
- GMR-LED&RZR Dash Kit:
- Marine digital media receiver w/ inline 10A & 1A fuses
- Wiring harness
- Mounting bracket (pre-installed on radio)
- 2 Threaded studs/posts (pre-installed)
- 4 Nuts (pre-installed)
- 2 Lock-washers (pre-installed)
- 2 Front-covers (pre-installed)
- 2 Nuts
- Operator's Guide
- QR Code for Installation Instructions
NA2-400.2RC Amplifier:
- 2-Channel amplifier w/ attached 8" power/ground and speaker output harnesses (terminated with Molex plugs)
- 16" Power/ground harness (inline 30A ATC fuse)
- 16" Speaker output harness
- Four 18mm screws
- Quickstart guide
NA2-400.1 Amplifier:
- Mono amplifier (attached 7" 3-pin & 2-pin harnesses)
- 16" Power/ground harness (inline 30A ATC fuse)
- 16" 2-Pin speaker harness
- Four 3/4" screws
- 4 Flat-washers
- 4 Lock-washers
- Remote level control (attached 15.5' cable w/ Molex connector)
- Amplifier installation guide
MQBR-POD-2:
- 2 Speaker pods pre-loaded with NH1-120B 8" drivers (attached 11" wire harness)
- Four 18mm bolts
- Two 24mm T40 Torx screws
- 4 Flat-washers
- QR Code for installation instructions
NHT1-120BPR:
- 2 Speaker enclosures pre-loaded with NHT1-120PB 8" drivers (attached upper mounting clamp and 7" bare-ended speaker wire)
- 2 Large lower clamps
- 2 Small lower clamps
- 2 Large rubber spacers
- 2 Small rubber spacers
- Eight 25mm hex-socket bolts
- 4 Crimp connectors
- 2 MB Quart adhesive logos
MBQR-SUB-2:
- Loaded 10" subwoofer enclosure w/ attached 20" wire harness
- 2 Mounting plates
- 2-1/4" Metal support tab
- Eight 3/4" bolts
- 8 Lock-washers
MBQR-ACC-1:
- Single amp mounting plate
- Dual amp mounting plate
- 3' Power harness (inline 50A Maxi fuse)
- 80" Speaker output splitter harness
- 9' Right rear speaker harness
- 9' Left rear speaker harness
- 32" 4-Seat extension harness
- 6-Pin Radio power adapter harness
- Two 2' stereo RCA cables
- Two 4" LED jumper/splitters
- Ten 7" wire ties
- Eight 12mm screws
- 8 Flat-washers
- 8 Nylock nuts
RETURNS POLICY
You may return your item(s) for refund within 30 days of receipt of your shipment.
You may return your item(s) for replacement within 30 days of receipt of your shipment.
We do not ship any replacements before we receive and inspect the returned merchandise.
Please read our policy carefully as we cannot process a return in the unfortunate event that the below conditions are not met.