Sold Out
MB Quart MBQX-STG5-1 800 Watt STAGE 5 Can-Am X3 Tuned System
Subcribe to back in stock notification
Free Shipping
Free standard shipping to Contiguous 48 US States
Free Returns
Learn More.
MB Quart MBQX-STG5-1 800 Watt STAGE 5 Can-Am X3 Tuned System
Can-Am's Maverick X3 is a high-performance side-by-side with plenty of power, and MB Quart's Stage 5 kit is the ultimate Maverick system. With a marine digital media receiver, front and rear 6-1/2" marine speakers, a 4-channel amp, a mono sub amp, and a 10" subwoofer, this system will add some serious thump to your off-road adventures.
MB Quart designed this package to fit right into your Maverick, with no cutting and minimal hassle. It also comes with all the parts and pieces needed for a smooth, hassle-free installation. Each component is tough enough for trail duty, so you won't have to worry about your system getting swamped.
Product highlights:
- marine digital media receiver (does not play CDs)
- system also includes:
- 4 speakers, 10" subwoofer, 4-channel amp, mono amp
- speaker and sub enclosures, dash kit, amp brackets, installation parts and wiring
- compatible with Smart-Lok
MB Quart GMR-LED marine digital media receiver (does not play CDs)
- built-in amplifier (20 watts RMS/40 peak x 4 channels)
- built-in Bluetooth connectivity
- works with Apple and Android smartphones
- global AM/FM/Weather tuner
- inputs: AUX in, USB port, video/camera input
- outputs: 6-channel preamp outs (4-volt front, rear, sub), video out
- independent subwoofer level control with selectable low pass filter
- warranty: 1 year
MB Quart NP1-116 6-1/2" Nautic marine speakers (2 dash and 2 cage-mount)
- power handling up to 60 watts RMS (120 watts peak)
- designed to marine and off-road use
- 1" titanium dome tweeters
- Santoprene rubber surrounds
- warranty: 1 year
MB Quart MBQX-SUB-2 10" marine subwoofer
- handles up to 400 watts peak power
- enclosure mounts under front seat
- dual voice coils
- IP67-rated
- warranty: 1 year
MB Quart TM400X4AD 4-channel amp
- Class D design
- 100 watts RMS x 4 at 4 ohms (400 watts peak)
- frequency response: 20-20,000 Hz
- low-pass crossover and bass boost
- conformal-coated circuit board — suitable for power sports and marine applications
- warranty: 1 year
MB Quart NA2-400.1 mono subwoofer amp
- Class D design
- frequency response: 10-300 Hz
- power specs: 200 watts x 2 at 4 ohms (400 watts x 1 at 2 ohms)
- electronic crossover
- warranty: 1 year
- MFR # MBQX-STG5-1
What's in the box:
- This package contains 7 individually boxed items along with a QR Code for installation instructions:
GMR-LED&X3 Dash Kit:
- Marine digital media receiver w/ inline 10A & 1A fuses
- Wiring harness
- Mounting bracket (pre-installed on radio)
- 2 Threaded studs/posts (pre-installed)
- 4 Nuts (pre-installed)
- 2 Lock-washers (pre-installed)
- 2 Front-covers (pre-installed)
- Four 1-1/4" Screws
- 2 Nuts
- Operator's Guide
MBQX-POD-1:
- Two NP1-116 6.5" coaxial speakers pre-mounted into left and right side mounting panels
NPT1-116B:
- 2 Pod-mounted 6.5" coaxial speakers w/ attached upper mounting clamp and 7" bare ended speaker wire
- 2 Lower mounting clamps
- Two 1.875" rubber spacers
- Two 1.75" rubber spacers
- 2 After-market roll-cage rubber spacers
- Eight 25mm hex-socket bolts
- 2 Large "MB Quart" adhesive emblems
- 2 Small "MB Quart" adhesive emblems
NA2-400.2 Amplifier:
- 2-Channel amplifier w/ attached 8" power/ground and speaker output harnesses (terminated with Molex plugs)
- 16" Power/ground harness (inline 30A ATC fuse)
- 16" Speaker output harness
- Four 18mm screws
- Quickstart guide
NA2-400.1:
- Mono amplifier (attached 7" 3-pin & 2-pin harnesses)
- 16" Power/ground harness (inline 30A ATC fuse)
- 16" 2-Pin speaker harness
- Four 3/4" screws
- 4 Flat-washers
- 4 Lock-washers
- Remote level control (attached 15.5' cable w/ Molex connector)
- Amplifier installation guide
MBQX-SUB-2:
- Loaded 10" subwoofer enclosure w/ attached 20" wire harness
- 2 Mounting brackets
- Three 6-1/2" strips of foam padding (3M adhesive backing)
- Two 2" aluminum spacers
- One 1/2" plastic spacer
- Six 3/4" bolts
- Two 1" Torx screws (T-30)
- 2 Nylock nuts
- 2 Large flat-washers
- 12 Small flat-washers
- 6 Lock-washers
MBQX-ACC-1:
- Amplifier mounting plate
- 7.5' Power harness (inline 70A Maxi fuse)
- 5' Speaker output splitter harness
- 7.5' Right rear speaker harness
- 7.5' Left rear speaker harness
- 32" 4-Seat extension harness
- 6' Subwoofer harness
- Two 3' stereo RCA cables
- One 12" RCA cable
- Two 8.5" RCA splitters (1 male to 2 female ends)
- Two 4.5" LED jumper/splitters
- Ten 7" wire ties
- Eleven 12mm screws
- 8 Flat-washers
- 8 Nylock nuts
RETURNS POLICY
You may return your item(s) for refund within 30 days of receipt of your shipment.
You may return your item(s) for replacement within 30 days of receipt of your shipment.
We do not ship any replacements before we receive and inspect the returned merchandise.
Please read our policy carefully as we cannot process a return in the unfortunate event that the below conditions are not met.